The Power Supply Tower from Heraeus Noblelight America is a modular power supply stand that can be configured to hold a variety of UV curing equipment power supplies. Two versions are available: wide and narrow.
The Wide Tower supports any combination of up to five LH10, VPS, P600, or P150 or P155 power supplies. The Narrow Tower supports any combination of up to five LH6 or P300 power supplies.
An optional Power Distribution Box mounts on top of the tower. It includes a main power switch and individual circuit breakers to protect each power supply. The Power Distribution Boxes deliver power for up to five power supplies.
An optional E-Stop mounts in the tower's top crossbar. It provides a "hard" emergency stop circuit to open the main contactors in each supply. (This removes all high voltage from the irradiators.)
Height: 1564 mm / 61.6" (all versions without Power Distribution Box)1886 mm / 74.25" (all versions with Power Distribution Box)
Depth: 915 mm / 36" (all versions)
Width: 587 mm / 23.1" (Wide version)465 mm / 18.3" (Narrow version)
Finish: Stone Grey (RAL 7032) textured polyurethane
Clearances: 254 mm / 10" (from floor to underside of bottom power supply)1781 mm / 70.1" (maximum height from floor to main power switch)
The Main Switch is rated for 115 amps at 480 VAC. All IEC-style circuit breakers mount on an internal 35 mm DIN rail. Circuit breaker ratings will vary, depending on the installed power supplies. Power is delivered to each power supply using flexible cords.
- The Tower should be secured to the floor using 12 mm / 0.5" bolts.
- VPS and, P150, and P155 power supplies may be secured to the Wide Tower shelves using threaded fasteners.
- P300 power supplies are mechanically "trapped" on the Narrow Tower shelves.
Contact us if you would like more information or have specific questions.